home *** CD-ROM | disk | FTP | other *** search
- Reconized commands are:
-
- quit
- exits injector.
-
- logon
- starts logging packets in file injector.log.
-
- logoff
- stops logging.
-
- onlytcp
- displays only tcp packets.
-
- allpkt
- displays all kind of packets.
-
- set [variabile name] [value]
- sets a variabile. Ex.: "set infile pink.pkt".
-
- unset [variabile name]
- relases a variabile.
-
- onlyip
- shows only TCP/IP packets.
-
- allpack
- shows all other types of packet (i.e. IPX).
-
- setmyip [my IP adress]
- manually set source IP adress.
- Ex.: "setmyip 192.168.0.2"
-
- settoip [destination IP adress]
- manually set destination IP adress
-
- setmyeth [my ethernet address]
- manualy set source ethernet address.
- Ex.: "setmyeth 12:34:56:78:9a:bc".
-
- setethto [destination ethernet address]
- manually set destination ethernet address.
-
- show [variabile name]
- shows content of a variabile.
-
- maskpsrc [port number]
- displays only packets from a TCP/UDP port. Set to 0 for all
- packets. Ex.: "maskpsrc 1452".
-
- maskpdst [port number]
- like previous for destianation port.
-
- maskipsrc [ip number]
- displays only packets from a ip address. A zero in a byte means to
- don't mask that part of the address. For example
- "maskipsrc 140.45.12.43" displays only packet from host
- 140.45.12.43, "maskipsrc 140.35.0.0" displays all packets from
- 140.45.*.*.
-
- maskipdst [ip number]
- like previous for destination.
-
- do [command name]
- executes an internal command.
-
-